HAKO 147015 Скачать руководство пользователя страница 20

Страница: 20 / 190

01-147015-00-00.fm

Safety Instructions

1.8 Shutting down and disposal

If the end of use of the vehicle or of its components is reached and this is handed over for scrapping, the compo-

nents must be correctly disposed of. Here the regulations of the competent local authorities must be observed.

The operating materials in the vehicle require special disposal and may not get into the environment. Further

information about disposal is available through the competent local authorities and the authorised Hako dealer.

•

Do not dispose of products with the symbol

at the end of their life in the domestic waste.

•

Recycle used materials with the symbol

according

their labelling.

•

Recycle packaging materials and do not throw them into the domestic waste.

•

Recycle plastics that are identified with statement of the material, such as PPTV20 for example, and do not

throw them into the domestic waste.

•

Old batteries contain hazardous materials and must be returned to the distributor, disposed of correctly or

delivered to a collecting point. Do not throw old batteries into the domestic waste.

•

Treat operating materials such as oils, hydraulic fluids or fuels as hazardous waste and dispose of them

correctly.

•

Have refrigerants disposed of only by an authorised workshop with expert staff and the required technical

equipment. Refrigerant may under no circumstances get into the atmosphere.

•

Observe national regulations.

Содержание 147015































































































































































































Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды

HAKO 147015, Руководство по эксплуатации

Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды