background image

126

06-147015-00-00.fm 

Attachments and Options

6.1.1

Labels on the unit

Safety foil

The safety foils (red/white) 

Fig. 116-A

 are located on the cover of the 

sweeping unit and at the back of the dirt hopper.

Hako logo

The Hako logo

Fig. 116-B

 is located on the cover of the sweeping unit.

Type plate

A type plate

Fig. 116-C

 is located on the sweeping unit, on the dirt hopper, 

on the trolley and on the supports.

Label PM10

The fine dust certificate label PM10

Fig. 116-D

 is located on the dirt 

hopper.

6.1.2

Vacuum sweeping system safety instructions

Danger

Danger to life in the danger area of the vehicle! Special caution is required under the raised tipper 

and in the area of the sweeping unit.

Danger of tilting over when driving uphill or downhill and transversely to a slope! Avoid sudden 

turns when driving uphill or downhill or across slopes. There is a risk of tilting over in an inclined 

position! The vehicle speed must always be adapted to the surrounding conditions and the load 

condition.

Danger of tilting due to wrong steering! Note that the steering behaviour of an articulated steered 

vehicle differs essentially from that of a car. Sudden steering movements at high speed or too high 

speeds when turning can cause the vehicle to tilt over.

Risk of injury! Frequently check the filling level of the dirt hopper. Switch the suction fan off for this! 

The lid and the side doors of the dirt hopper must not be opened when the suction fan is running.

Risk of accident! Make transport journeys only with the sweeping unit raised and secured in the 

transport position.

Risk of accident! Make transport journeys only with a completely lowered dirt hopper!

Risk of accident! The stability of the vehicle is influenced by a filled dirt hopper. Handling of the 

vehicle must be adapted accordingly.

Risk of accident! Do not exceed the permissible total weight of the vehicle!

Risk of accident! When the dirt hopper is emptied, the Citymaster 650 must be on a sufficiently 

load bearing, horizontal surface. Driving with the dirt hopper tilted is not permitted.

Warning

When removing blockages in the suction hose or attaching the hand suction hose (optional), 

switch off the engine and wait for the suction fan to come to a standstill.

The vacuum sweeping system may be operated only in connection with the Citymaster 650. The 

safety regulations for the Citymaster 650 must be complied with absolutely.

Caution

The labels attached to the vehicle provide important information for safe operation. Renew labels 

that are no longer legible or present.

Spare parts must be original spare parts to guarantee safety.

Содержание 147015































































































































































































Отзывы: