HAKO 147015 Скачать руководство пользователя страница 103

Страница: 103 / 190

05-147015-00-00.fm

103

Maintenance and Servicing

5.3 Engine

5.3.1

Checking the engine oil level

Check the engine oil level daily and refill as required.

1. Place the vehicle on a level surface and hold it with the parking brake.

Switch the engine off and pull out the ignition key. Let the engine cool

down.

2. Remove the right side panelling, see page 102.
3. Check the engine oil level with the dip stick

Fig. 98-B

4. The engine oil level should lie between the MAX and MIN mark of the

dip stick and may never drop below the MIN mark.

5. Refill engine oil as required and check the engine oil level once again.

Engine oil Titan Cargo 5W-40, API CJ-4

6. Reinsert the dip stick.

Danger

•

Toxic engine exhaust gases! Inhaling exhaust gases is injurious to health and can lead to uncon-

sciousness and to death! Never let the engine run in enclosed spaces.

•

Danger of burns from hot parts! Do not touch any parts such as engine block, cooling system and

exhaust system during operation and for some time after. Let the engine cool down.

•

Risk of scalding from hot engine oil! If the cap is opened when the engine is hot, there is a risk of

scalding. Let the engine cool down.

•

Risk of injury due to rotating parts! Injury of limbs or hair or clothing getting caught up. Switch the

engine off and pull out the ignition key.

Attention

•

If the engine oil pressure warning symbol

Fig. 98-A

in the multifunction display lights up with the

engine running, there is a risk of engine damage! Stop the vehicle in the safe range. Turn the

engine off immediately and check the oil level. Have the cause of the inadequate engine oil

pressure removed.

Environmental danger

•

Ensure safe and environment-conserving disposal of operating and auxiliary materials.

Take up escaping or spilled operating materials in suitable containers and dispose of them in an

environmentally friendly manner.

Fig. 98:

Note

The circulating engine oil requires a few minutes to flow back

to the oil sump.

Note

The engine oil level must not be above the MAX mark.

Содержание 147015































































































































































































Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды

HAKO 147015, Руководство по эксплуатации

Результаты поиска

Содержание 147015

Отзывы:

Похожие инструкции для 147015

Бренды по названию

Популярные бренды