HAKO 147015 Скачать руководство пользователя страница 89

Страница: 89 / 190

03-147015-00-00.fm

Operation

3.3.3

Troubleshooting

The engine does not start, the starter works audibly.

Remedy

The engine electronics are faulty. The fuel supply is faulty. Do not repeat the starting procedure more than

3 times, then let the starter cool down. If the engine
does not start even after several starting attempts:
Notify an authorised workshop.

The engine does not start, the starter is not audible.

Remedy

The electrical system voltage is too low because the
battery is too weak or empty.

Have starting help applied. If the engine does not
start despite starting help: Notify an authorised
workshop.

The starter was exposed to too high thermal loading.

Let the starter cool down for around 2 minutes. Start
the engine again. If the engine still does not start:
Notify an authorised workshop.

Содержание 147015































































































































































































Результаты поиска

Содержание 147015

Отзывы:

HAKO 147015, Руководство по эксплуатации, Страница: 89 / 190

Результаты поиска

Содержание 147015

Отзывы: