Hakko Electronics Monitouch S8 Series, Спецификация аппаратного обеспечения

Страница: 75 / 79

7
1. Inspection and Maintenance 7-1
Inspec
tion and
Maintenanc
e
1. Inspection and Maintenance
Daily Inspection
•
Check that the screws on the S8 series are tightened firmly.
•
Check that the connectors and terminal screws used for connection with other devices are
tightened firmly.
•
If the display surface or frame is dirty, wipe it with a soft cloth soaked in alcohol (commercially
available).
•
Conduct periodical inspection once or twice a year. The number of inspections may be increased
as necessary if facilities are relocated or modified, or the environment is hot, humid, or dusty.
Periodical Inspection
Inspect the following points periodically.
•
Are the ambient temperature and humidity appropriate?
0 to +50
°
C, 85%RH or less
•
Are the environmental conditions appropriate?
No excessive dust, and no conductive dust
•
Does the atmosphere contain no corrosive gas?
•
Is the source voltage in the allowable range?
With DC power supply: 24 VDC
±
10%
•
Are the S8-series mounting screws tightened firmly?
•
Are the connectors and terminal screws used for connection with other devices tightened firmly?
•
Is the lithium primary battery within the expiry date?
About 5 years from the date of your purchase
DANGER
Be sure to turn off the power before conducting inspection or maintenance. Failure to
do so could cause an electric shock or damage to the unit.