48
Press the
button twice.
Press the
button three times.
Press the
button.
Press the
button.
Select and input three letters for password
from six letters on the right.
Example: The procedure for changing the set temperature when the unit is restricted by a password.
(Password is "AbC")
The unit will move to the change setting screen for each mode after entering the password. Please change
the setting for each mode according to the procedure covered in this manual.
The letters
for password
CAUTION
・
If the password you entered is incorrect, the display will show
three dashes for you to re-enter the password.
・
If you enter the password incorrectly twice in a row, the display
will return to the previous screen.
Press and hold the
button for more
than one second.
Press the
button once.
Press the
button.
Example:
Changing the offset setting from 0
℃
to -30
℃
●
Offset mode
{Setting is available within the range of ±50°C (90°F)}
Each of the set values is displayed for two seconds, and each change is finalized.
CAUTION
If the total of a set value and an offset value exceeds 600°C, the exceeding portion in the offset value is
not effective.
Press and hold the
button for more
than one second.
Press the
button once.
Press the
button.
Press the
button thrice.
Press the
button.
Press the
button.
In this station, when you turn on “Preset mode” and “Chain Presets function” in the parameter settings
and set the timer for each preset, available presets are called in from “P-1” to “P-5” allowing you to
simulate up to a 5 step rework profile.
A preset in which “000” is set in the timer setting is skipped and the next preset is automatically started.
When the handpiece is placed in the holder, the automatic sleep function starts working (by default).
Pressing the START/STOP (HOT AIR) button in this state will not turn on the station. If the handpiece is
placed in the holder while it is blowing hot air, start of automatic cooling is forced before the stop of operation.
●
Chain Presets function
●
Auto sleep function
Other main functions
CAUTION
When installing this station, do not place flammable substances behind the outlet of the handpiece. If
the handpiece is placed in the iron holder while blowing hot air, serious accidents such as fire may be
caused by hot air.
