9
7. PARAMETER SETTING (Soldering iron)
The HAKKO FR-702 (Soldering iron) has the following parameters.
Value
℃ / ℉
54 ~ 270
℉ (30 ~ 150℃)
0
：
The normal mode
/ 1
：
The preset mode
（
2
pcs.）〜 （
5
pcs.）
0
：
Open
/ 1
：
Partial
/ 2
：
Restricted
：○
※4
/
：
×
※4
：○
※4
/
：
×
※4
：○
※4
/
：
×
※4
Select three letters
※1
It is displayed only when "1:Preset mode" is selected in the setting mode.
※2
It is displayed only when "1:Custom" is selected in the password setting.
※3
It is displayed only when either "1:Custom" or "2:valid" is selected in the password setting.
※4
○
: Password not required × : Password required
Parameter No.
Initial value
℃
150
℃
0
0
-
Parameter name
℃/F selection
Low temperature error setting
Setting mode selection
The number of preset
※1
Password setting
Temperature setting mode
※2
Preset selection mode
※2
Adjust mode
※2
Password
※3
●
: ℃ or ℉
temperature display seletion
The displayed temperature can be switched between Celsius and Fahrenheit.
●
: Low temperature error setting
If the sensor temperature goes below the low-limit temperature although heating element is on, an error
will be displayed.
●
: Setting mode selection
Temperature setting can be switched between the normal mode and the preset mode.
If selecting the preset mode, you will be asked for the number of preset you required.
Press the button to set the number.
●
: Password setting
Select “Open”, “Partial” or “Restricted” for password setting.If selecting the Restricted, perform the
setting for password. If selecting the partial, choose whether or not the password function is needed
when moving to the temperature setting mode, the preset mode and the adjust mode and set the
password.
●
Parameter entering mode
1. Turn off the power switch.
2. Turn on the power switch while pressing the button.
3. When the display shows , the station is in parameter entering mode.
