31
●
Sleep Temp
●
Low Temp
1. Move the cursor to select “Sleep Temp”.
After selecting, press <ENT>.
Sets the auto sleep temperature.
When the temperature drops below a set limit, an error is displayed and the buzzer
sounds.
2. Entering from hundreds to units digit.
Press the <
↑
> or <
↓
> to set the desired
figure.
Only values from 2 to 3 can be selected when
entering the hundreds digit.
(In ℉ mode, values from 3 to 5 can be
selected.)
Values from 0 to 9 can be selected when
entering the tens or units digits.
(The same values can be selected in ℉ mode.)
2. Entering from hundreds to units digit.
Press the <
↑
> or <
↓
> to set the desired
figure.
Only values from 0 to 1 can be selected when
entering the hundreds digit.
(In ℉ mode, values from 0 to 2 can be
selected.)
Values from 0 to 9 can be selected when
entering the tens or units digits.
(The same values can be selected in ℉ mode.)
3. After entering the units digit, press the button
to save the figure to the system memory
1. Move the cursor to select “Low Temp”.
After selecting, press <ENT>.
3. After entering the units digit, press the button
to save the figure to the system memory
<↑>
<↓>
<ENT>
V a c u umM o d e
A u t o S l e e p
S l e e p T e m p
NOR
06
m
200ﾟ C
<↑>
<↓>
<ENT>
S l e e p T e m p S e t
00ﾟ C
<↑>
<↓>
<ENT>
A u t o S l e e p
S l e e p T e m p
L o w Te m p
06
m
200ﾟ C
150ﾟ C
<↑>
<↓>
<ENT>
L o w T e m p S e t
50ﾟ C
