Hakko Electronics FR-1418, Руководство по эксплуатации и обслуживанию

Страница: 32 / 54

30
Select “EDIT/TEACH SETTINGS”
to Edit or Teach a Recipe.
Select “SETUP/DIAGNOSTICS”
to enter Setup Mode (pgm password)
or run Diagnostics.
Select “MANUAL MODE”
to run the bottom heaters manually.
Select “RAMP & HOLD MODE”
to control the bottom heaters based
on a desired set point temperature
and an actual thermocouple reading.
LOADING A NEW RECIPE TO RUN
From MAIN MENU, select “LOAD NEW
RECIPE”. Use the SET UP, SET DN keys
to increment/decrement the recipe #.
Push the <SET> key to accept the choice.
Note: The unit holds 100 (#00-#99) recipes in non-volatile memory.
ENTERING THE PASSWORD
Use the SET UP, SET DN keys to enter
the 1st digit of the password and push <SET>
Repeat until all 6 password digits are entered
Note: The system default password is 123. You must push <SET> 3 times to serve as the last 3 digits.
--OR--
<STOP> TO EXIT
--OR--
<STOP> TO EXIT
--OR--
<STOP> TO EXIT
--OR--
<STOP> TO EXIT
EDIT/TEACH SETTINGS?
<^><v> OR <MENU>=YES
SETUP/DIAGNOSTICS?
<^><v> OR <MENU>=YES
MANUAL MODE?
<^><v> OR <MENU>=YES
RAMP & HOLD MODE?
<^><v> OR <MENU>=YES
#00=RECIPE NAME
<^><v> OR <SET>=ENTR
PASSWORD? (6 DIGITS)