Hakko Electronics FR-1418, Руководство по эксплуатации и обслуживанию, Страница: 21 / 54

19
5.0 Options
A variety of nozzles, vacuum tips, accessories and factory installed options are available to meet the
needs of different rework applications. Consult your sales representative for the most up-to-date
information on accessories and options. Some major system options are briefly described below.
Additional operation and maintenance supplements to this manual may be supplied with some options.
Major System Options:
1. Two-Zone Bottom Heater – This option provides a second, 10 x 12 inch bottom infrared heating
zone which can be turned on or off in any heating step of each recipe. The total bottom heat area
with this option installed is 12 inches in the Y direction and 20 inches in the X direction. The
left-hand zone is Zone 1 in the recipe, while the right-hand zone is Zone 2.
Figure 28: Two-Zone Bottom Heater Option
2. Thermal Analysis and Control Software – An advanced software control and temperature
profiling software package is available that allows the rework system to be controlled by a
Pentium™ class PC with its serial port connected to the HOST PC connector (Fig. 20) on the
machine’s rear panel. This software also allows the recipes to be created and stored on the PC.
Thermocouple data can be plotted real-time, stored, and analyzed using software tools for
measuring ramp rates, time above melting temperature, and more. The customer can purchase
software only, and provide their own PC, or the software can be preinstalled on a PC with a
frame-grabber card for viewing the video camera images using a 15 inch or 17 inch PC monitor.
(This option may not currently be available for all models.)
3. Automatic Motorized Z Axis – This option is only available if option 2, above, is installed. It is
only available as a factory-installed option. The Heater head is driven by a motorized lead
screw, making the Z-Axis of the machine automatic. This allows more automated rework cycle
operation, with the pick-and-place operations programmed into the recipes, and controlled by the
PC software. (This option may not currently be available for all models.)