33 / 48
Hakki Pilke 43 Pro
Translation
Version 6-2018
5.1.2.
Replacing the saw bar
Replace the saw bar as follows:
1.
Remove the cutting chain
according to steps 1–3 of
Section 5.1.1.
2.
Remove the beam’s fastening
bolts (A in Figure 26).
3.
Remove fastening plate C
(Figure 27) and remove the
saw bar from the groove.
4.
Place the new bar against gear
wheel B, twist it into the
groove and loosely attach the
saw bar bolts (A) and fastening
plate C.
5.
Install the cutting chain in
place according to steps 4–6 of
Section 5.1.1.
Figure 26.
Figure 27.
