4 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
1.
General information
1.1. Introduction
The purpose of this manual is to ensure that the machine is used in the manner intended by the manufacturer,
taking safety into consideration. Everyone operating the machine or working in close proximity to it must study
this manual carefully.
Operators of the machine are expected to have basic skills in tractor handling, such as utilising the cardan shaft
drive and the tractor's lifting equipment. Before commencing work, operators must also familiarise themselves
with the machine's control and safety equipment, and ensure their proper operation.
Additional information on Maaselän Kone Oy's products is available on our website at
www.hakkipilke.fi
.
Keep this manual in the immediate vicinity of the machine.
1.2. Purpose of use
The Hakki Pilke Falcon firewood processor is designed for the preparation of firewood from pruned wood or logs.
The firewood processor must not be used to process any treated wood, such as is found in construction waste.
Sand, nails or other impurities in the wood may damage the machine.
The maximum diameter of the logs to be split is 35 cm. This limit must not be exceeded. When estimating the
diameter of the log you are about to split, note that the shape of the log and other factors, such as branches and
burrs, make the actual diameter larger, and may prevent the log from being fed to the machine. Do not spit logs
that exceed 50 cm in length.
1.3. Machine models and basic information
Model
TR
Electrical
Combi
Driving power
Tractor’s cardan
shaft (TR)
Electric motor
Tractor’s cardan shaft
electric motor
Weight
890 kg
930 kg
960 kg
TR/Electrical drive
min 20 hp / max 500
rpm
7.5 kW (min 16 A
type D fuse)
7.5 kW (min 16 A type D fuse)
Height/width/length
in the transport posi-
tion
Transport position 250/255/135 (cm)
In-feed/out-feed con-
veyor
220/400 (cm)
Saw bar/chain
bar: 16” groove 1.5 mm, chain: 67 loops, pitch 0.325”
Max log diameter
35 cm
Max/min log length
Log max 50 cm; min 17 cm
The machine’s serial number, date of manufacture, weight, operating voltage (electrically operated machines)
and model are indicated on the grey type plate located on the machine frame below the locking latch of the out-
feed conveyor, on the right side of the operator.
Содержание 35 Falcon
Страница 32: ...32 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35...
Страница 33: ...33 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 36 Figure 37 Figure 38 Figure 39...
Страница 36: ...36 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 43 Figure 44 Figure 45 Figure 47 Figure 46...
