27 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
Replacing the saw bar
Replace the saw bar as follows (Figure
22
Virhe. Viitteen lähdettä ei löytynyt.
):
1.
Remove the saw chain according
to steps 1–5 of Section 4.7 “Re-
placing and tightening the saw
chain”.
2.
Remove flange bolts (2 pcs) and
remove the flange fastening plate
A.
3.
Remove the saw bar from the
groove.
4.
Place the new flange against gear
wheel B, twist it into the groove
and loosely attach the flange
bolts and fastening plate A.
5.
Attach and tighten the saw chain
according to steps 6–8 of Section
4.7 “Replacing and tightening the
saw chain”.
Figure 22
Содержание 35 Falcon
Страница 32: ...32 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35...
Страница 33: ...33 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 36 Figure 37 Figure 38 Figure 39...
Страница 36: ...36 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 43 Figure 44 Figure 45 Figure 47 Figure 46...
