28 / 41
Hakki Pilke 35 Falcon
Translation
Version 10
4.8.
Changing the oil
Change the hydraulic oil of the fire-
wood processor as follows (Figure 23
and Figure 24):
1.
Shut the machine down and
disconnect it from its power
sources.
2.
Open filler cap A of the hy-
draulic oil tank (this will al-
low the oil to drain more
easily).
3.
Open drain plug B and drain
the oil into a suitable con-
tainer.
4.
Open the cover of hydraulic
filter C and replace the filter.
5.
Tighten plug B firmly, and fill
the tank with fresh oil (ap-
prox. 65 litres). Ensure that
the oil type matches the op-
erating temperature! (See
the maintenance table.)
6.
Finally, ensure that the oil
level settles at the halfway
point of gauge D.
Figure 23
Figure 24
Содержание 35 Falcon
Страница 32: ...32 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35...
Страница 33: ...33 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 36 Figure 37 Figure 38 Figure 39...
Страница 36: ...36 41 Hakki Pilke 35 Falcon Translation Version 10 Figure 43 Figure 44 Figure 45 Figure 47 Figure 46...
