HYDROK – Transporting, packaging and
storing
5.3 Transport inspection
Check delivery immediately upon receipt to ensure that
delivery is complete and to identify any transport dam-
age.
Proceed as follows it there is apparent external dam-
age:
Do not accept the delivery, or only accept it with
reservation.
Note the extend of transport damage on the trans-
port documents or on the transport company's deliv-
ery ticket.
Submit a complaint.
Report any defect as soon as it is detected.
Claims for damage compensation can only be
enforced during the applicable periods for giv-
ing notice of lack of conformity.
5.4 Unpacking and inner-company transportation
14.x
The clamping device is packed vertically and
has threaded bores in the end face.
From about weight 15 kg there are also thread-
ed holes in the circumference of the clamping
device. Lifting eye bolts can be screwed into
these threaded holes.
For transporting with transport trolley the
clamping device must be positioned in stand-
ing condition. Make sure that a non-slip pad
has been laid.
To safely lift the clamping device out of the
package it must be hooked into a crane de-
pending on the weight.
All tools and accessories which are not in
scope of delivery are marked as optional in the
operating instructions.
Two people are required for this task.
Special tools required:
Crane from weight more than 15 kg
Lifting eye bolts
1. Screw lifting eye bolt into the thread in the end
face of the clamping device.
2. Hook the load-handling equipment into the lifting
eye bolt.
Order h49 7144.907-333
61
