HYDROK – Structure and function
4.3 Brief description HYDROK / HYDROK32
The HYDROK is ideal for stationary use: eg in drilling
and machining centers and milling machines.
The clamping heads consist of hardened steel seg-
ments which are vulcanized together. They guarantee
parallel clamping of the workpieces as well es a fast
set-up and high accuracy - during minimum deforma-
tion of the workpieces.
Due to the axial pulling components while clamping,
the clamping head is pulled directly into the stationary
chuck. This makes the clamping of the workpieces
very stable. Additional the entire clamping device gets
stiff which affects the service live of the tools favor-
ably.
5-axis machining or rational multiple clamping, wit h
the HYDROK we offer a hydraulically actuated sta-
tionary chuck that provides even more implementa-
tion possibilities. It can be used with all clamping de-
vice adaptations, such as the MANDO Adapt man-
drel-in-the-clamping device or with the jaw adapter.
Consequently, allowing for future and complete relia-
bility on the intelligent HAINBUCH modular system,
even for stationary clamping devices.
Key advantages:
Easy set-up
Repeatability < 0.01 mm possible
Ideal for automated clamping
Angular contour allows lower space requirement
Multiple clamping made possible in the smallest
space
Ideal for 5-side machining
Typical HAINBUCH features, such as user friendly
set-up, full passage, parallel clamping, optimal pow-
er conversion, extreme rigidity and superior holding
power, as well as minimal wear and tear
Prepared for work piece end-stop and front end-
stop
With the HYDROK 32 you may adjust the required
pressure by the tandem cylinder.
Order h49 7144.907-333
53
