24
31-7000069 Rev. 1
Installation Instructions
Screw
Slide
exhaust
adaptor into
guides on
microwave
oven rear.
Exhaust
Adaptor
Damper
(hinge side up)
Locking
Tabs
Back of
Microwave
Oven
Replace screw on the back of the unit.
Slide the vent damper on the back of the unit with
the hinge at the top.
7
6
8
ADAPTING BLOWER FOR
OUTSIDE BACK EXHAUST
(cont.)
C4.
5
ADAPTING BLOWER FOR
OUTSIDE BACK EXHAUST
·
cont
¸
C4.
Slide the Blower cover onto the top of the blower
plate opening
Slide the blower plate back onto the microwave
by placing the side tabs into the slots and pushing
gently until the back tab is seated into the rear slot,
replace the 3 blower plate screws. Replace the
blower motor screw.
9
Blower Cover
Blower Cover
Blower Cover
Screw
The fan needs to be rotated counter clockwise
180 degrees and rolled 90° to the right to be in the
correct orientation, keeping the blower part of
the fan where the air comes out at the top of the
fan. The wire needs to be reinserted into the case
housing once it has been oriented correctly.
Blower Plate
Blower Motor Screws
Before Rotation
After Rotation
Back of
Microwave Oven
Back of
Microwave Oven
Before Rolling
After Rolling
Back of
Microwave
Oven
Back of
Microwave
Oven
