Introduction
5. Remote Control
Installing Batteries
1. Open the battery compartment cover on the back of the remote control.
2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery
compartment. Don’t mix di
3
p
e
t
S
2
p
e
t
S
1
p
e
t
S
fferent types or used batteries with new ones.
3. Close the cover.
- The remote control should be operated within 30 feet (7m) and 30
0
to the left and right of the
IR receiver at the front of the TV.
- Used batteries should be disposed of properly.
Battery
Compartment
Cover
2 x AAA Battery
9
Batteries shall not be exposed to excessive heat such as direct sunlight or fire.
Instructions for fixing TV stand
1. Remove the the Rear Board from the Rear Cabinet of the TV by removing the screw.
The Rear Board
The Rear
Board
The Stand Neck
The Rear
Cabinet
2. Put the Rear Board on the Stand Neck, and fix the rear board with the screws supplied (4 x B4 x 16).
3. Put the Rear Board on the Rear cabinet of TV, and fix the rear board with the screws supplied
(8x2836/M4x12, 2xB4x16).
Front View
Back View
Remove the Screw
1
2
1
1
2
3
Remove the Rear Board
2
Screws: 2xB4x16
Screws: 2xB4x16
8x2836/M4x12
2xB4x16
Note: the pictures below are
only for reference
