TECHNICAL DOCUMENT
TORMACH.COM
Page 1
©Tormach® 2019. All rights reserved.
Specifications subject to change without notice.
TD10383_Touch_Screen_Kit_0919A
INSTALLATION GUIDE: TOUCH SCREEN KIT
Product Identification:
17” Touch Screen Kit (PN 35575)
Purpose:
This document details the installation and calibration of the Touch Screen Kit.
Qty
.
17” Touch Screen Kit
PN
1
Monitor
37761
1
VESA Mount Plate, 75 mm
35496
1
USB Extension Cable, 10 ft
30279
1
SVGA Video Extension Cable, 15 ft
35705
2
M4 x 10 mm Machine Screw
30537
2
M4 x 10 mm Thread-forming Screw
34249
3
Cable Tie Holder
33193
5
Cable Tie, 4 in.
31719
NOTE:
If any of these items are missing, contact
Tormach Customer Service at (608) 849-8381 for a
replacement.
NOTE:
This document assumes that the machine arm has already been installed.
Installation
1.
Using a Phillips screwdriver, remove four
screws on existing monitor mounting plate
(see
Figure 1
); set screws aside and discard
monitor mounting plate.
2.
Using four screws set aside in Step 1, mount
VESA Mount Plate to machine arm.
Figure 1
