Haier HWO60S14EPB4, Инструкция пользователя

Страница: 8 / 29

cable or special bundle available from the manufacturer or by
contacting the customer service department. The type of power
cable must be H05V2V2-F. This operation should be carried out
by a suitably qualified professional. The earth conductor (yellow-
green) must be approximately 10 mm longer than the other
conductors. For any repairs, refer only to the Customer Care
Department and request the use of original spare parts. Failure
to comply with the above can compromise the safety of the
appliance and invalidate the guarantee.
• The oven must be switched off before removing the removable
parts. After cleaning, reassemble them according the
instructions.
• WARNING: Never remove the oven door seal.
• When inserting the grid tray pay attention that the anti-slide
edge is positioned rearwards and upwards
• The appliance must not be installed behind a decorative door in
order to avoid overheating.
• The oven can be located high in a column or under a worktop.
Before fixing, you must ensure good ventilation in the oven
space to allow proper circulation of the fresh air required for
cooling and protecting the internal parts. Make the openings
specified on last page according to the type of fitting. Always fix
the oven to the furniture with screw provided with the appliance.
• excess spilled material must be removed before cleaning using
a self-clean cycle.
• Before starting a self-clean cycle, remove oven shelves and all
other cookware and/or utensils and accessories, and wipe up
large food spills or grease deposits,, using a damp sponge. Do
not use detergent.
• Do not place towels on the oven during the cleaning cycle
• Before starting a self-clean cycle, ensure you move any pet
birds to another, closed and well-ventilated room. Some pet
EN 08