Haier HW80-BP12929, Руководство пользователя

Страница: 17 / 32

5-Daily use
1. A
The appliance switches off automatically.
t programme cycle end is displayed.
2.
3. R
Turn off the water supply.
emove laundry as soon as possible to go easy on it and to prevent more wrinkl-
4.
5. Unplug the power cord.
6 . O
ing.
pen the door to prevent formation of moisture and odours. Let it open while not used
minutes before starting the programme or at the end of programme.The display
switches off.
.
To interrupt a running programme press gently “Start/Pause”. The LED in the button is
flashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
1. Press “Start/Pause” button to interrupt the running programme.
2.
5.12 After washing
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only
possible to open the door at the end of the programme or after the programme w-
as cancelled correctly (see description above).
In case of high water level, high water temperature and during spinning it is not
posible to open the door, is displayed.
Note: Standby mode / energy-saving mode
The switched on appliance will go into standby mode if it will not be activated within
2 minutes before starting the programme or at the end of programme. The display
switches off. The saves energy.
5.10 Start wash programme
Press “Start/Pause” button (Fig.5-8) to start. Applia-
nce operates according to present settings. Changes
are only possible by cancelling the programme.
5.11 Interrupt / cancel wash programme
5-8
5.13 Activate or deactivate the buzzer
The acoustic signal can be deselected if necessary:
1. Switch on the appliance.
2. Select the Drum Clean programme.
3.
Press the “Extra rinse” button “Temp.” button and “Steam” button at the same time
for about 3 seconds. “ ” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these three buttons at the same time again, then “
” will be displayed.
se
16
Start/Pause
Turn the knob to select a new programme and start it.