10-Installation
GB
26
10.5 Aligning the appliance
Adjust all feet (Fig. 10-5) to achieve a complete level
position. This will minimize vibrations and thus noise
during use. It will also reduce wear and tear. We recom-
mend to use a spirit level for adjustment. Floor should
be as stable and
fl
at as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten locknut (1) against the housing.
10-5
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts re
-
moved before installation to prevent damage:
1.
Remove the blanking plugs.
2.
Remove the back cover
3.
Insert the plastic spacers and the transportation bolts.
4.
Tighten the bolts with a spanner.
5.
Replace the back cover.
3.
Replace back cover by inserting it in the two gaps
its convex is facing out (Fig. 10-3.3).
4.
Fill left holes with blanking plugs (Fig. 10-3.4)
.
10-3.4
10-3.3
Note: Keep in safe place
Keep the transportation bolts in a safe place for later
reinstall the bolts.
