Haier HCE604P, Инструкция по установке и руководство пользователя

Страница: 12 / 22

10
Installation instructions
230-240 V 50 Hz
B
A
Unhook
to open cover
PE
N (L
2
)
L
1
1
2
3
4
5
1
2
3
5
4
N
L2
PE
L1
Unscrew
to open
cable
clamp
C
D
E
F
A
Power supply special cable section type “H05V2V2-F” or
equivalent rated minimum V-90.
Resistance to temperatures of 90°C
230-240 V~ 6000-6500 W 50 Hz (27A)
Connecting the power supply cable
1 Turn the cooktop over and place it on a soft surface.
2 Unhook the terminal board cover by inserting a screwdriver into the two hooks C (fig. 8).
3 Unscrew the screw D and open completely the cable clamp E (fig. 10).
4 Check the bridging links F are inserted into terminal block A as shown (Figs. 9 - 10).
5 Connect the phase, neutral and earth wires to terminal board A according to the diagrams in
figs. 9 - 10.
6 Strain the feeder cable and block it with cable clamp E (by screwing screw D ).
7 Close the terminal block cover (check the two hooks C are correctly hooked).
Important!
To connect the power supply cable DO NOT unscrew the screws fixing the cover plate B behind the
terminal block.
Fig. 8 Connecting the power supply cable Fig. 10 Bridging links
Fig. 9 Connection
diagram