MANUAL CONTROL
Manual control can be achieved by pressing suitable momentary
acting keys wired to the Orange and Blue wires provided on the
unit. The Blue wire connects to the UP key and the Orange wire
connects to the DOWN key.
You can control the blind in 2 different ways:
-
Press and hold down the key until the blind reaches the
desired position.
-
Give the key a short press to start the blind moving in the
direction you want and then another short press to stop it at
the desired position.
You can also fully open or close the blind just by giving a short
key press to start the blind moving in the direction you want .
The blind will then travel to the fully open or fully closed posi-
tion (as determined electronically by internal counting) and after
adding a 6 second over travel will automatically shut off the ap-
propriate drive relay. The over travel is to ensure that the blind
fully reaches its end stop before the unit switches off its drive
relays.
HAIBRAIN
X-10 CONTROL
The unit will respond to X-10 power line commands sent in
‘Standard’ and ‘Extended’ format.
The unit responds to ‘Standard’ X-10 messages ‘Address On’ ,
‘Address Off’ , BRIGHT and DIM .
‘ON’ fully opens the blind and ‘OFF’ fully closes it. A suitable
over travel depending on window size is added to the drive
time to ensure that the end stops are reached before the unit
switches its own relays off.
12
©
HAIBRAIN
