Hagie DTS 8 HI-TRACTOR, Руководство оператора

Страница: 44 / 121

Solution Pump
The solution pump is a hydraulically driven centrifugal pump
(fig. 5.25) with variable speed control. Engage the solution pump
while at a relatively low engine RPM setting (1,000 RPM).
Increase engine RPM slowly and maintain full recommended
throttle RPM for field operation. To activate the solution pump,
push the solution pump lever forward (fig. 5.26).
V.
OPERATING INFORMATION
Solution Pressure Gauge
The solution pressure gauge (fig. 5.27) gives the operator a
constant visual display of the amount of solution being applied
(measured in PSI). The pressure (as determined by the monitor-
controlled butterfly valve) will vary according to ground speed. If
applying solution manually, the solution pressure gauge visually
informs the operator of needed manual adjustments.
NOTE:
DO NOT allow the pump to continue running
when the boom switches are turned off. Failure
to do so will generate over-heating and cause
severe pump damage and void the warranty.
41
FIG 5.26
FIG 5.25
FIG 5.27