Hagie DTS 8 HI-TRACTOR, Руководство оператора

Страница: 45 / 121

FIG 5.28
V.
OPERATING INFORMATION
42
Electric Solution Valves
The spray booms are divided into sections that are
independently supplied with solution and can therefore
independently be shut off or turned on. The number and location
of solution valves varies with boom length. Sixty foot booms are
divided into three sections and the valves are mounted on the
transom. Eighty and ninety foot booms are divided into five
sections with three valves mounted on the transom and one
mounted on each boom.
Boom Valve Switches
The electronic boom solution valves are controlled by a panel
of switches mounted under the spraying system’s monitor (fig.
5.28). When the switches are in the “UP” position they are on
and when they are in the “DOWN” position they are off.
Main Solution Switch
The main solution switch is a floor-mounted “dimmer-style”
switch (fig. 5.29, item 2). It controls the power supply to the panel
of boom solution valve switches. The main floor switch must be
on to supply the panel switches with voltage. This way you can
turn all of the boom solution valves “ON” or “OFF” all at once in a
hands-free execution such as turning the main solution switch
“OFF” as you arrive at the end rows of a field and turn it back
“ON” as you enter the field again.
When the main solution switch is “ON” a “GREEN” indicator
light mounted at the bottom of the instrument panel will light up
(fig. 5.29, item 1). When the light is not lit, the main solution
switch is “OFF.”
FIG 5.29
1
2