6LE002957D
16
HagerEnergy GmbH Group - Ursula-Flick-Straße 8 - DE-49076 Osnabrück
Hager 04.23 -
Usable in all Europe
M
and in Switzerland
Correct Disposal of this product
(Waste Electrical & Electronic Equipment).
z
(Applicable in the European Union and other European countries with separate collection systems).
This marking shown on the product or its literature indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to
the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of
material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this device for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes of
disposal.
Information about adapter requirements according to IEC61851-1:
Vehicle adapters must not be used to connect a mobile vehicle plug to a vehicle connector socket.
Adapters placed between the EV socket and the EV plug should only be used if they have been specifically designed and approved by the vehicle
manufacturer or the manufacturer of the EV power system and meet national requirements.
These adapters shall meet the requirements of this Standard and other relevant standards governing the parts of the adapter corresponding to
either the EV plug or the EV socket.
Adapters shall be marked to indicate their specific conditions of use The adapters shall be marked to indicate their specific conditions of use
permitted by the manufacturer, e.g. the IEC 62196 SERIES.
These adapters should not allow switching from one mode to another.
Ventilation supported
'Assembly, installation and configuration of electronic devices may only be carried out by an electrotechnically trained and certified specialist in
accordance with the relevant installation standards.
Trained and certified specialist in accordance with the relevant installation standards of the country.
"All circuits must be installed completely in the same structure (from an electrical point of view) of the building."
After Servicing, maintenance or setting, the front cover need to be put back in place.
For use by ordinary and authorized persons.
Electromagnetic compatibility classification: other than residential (commercial, light industrial and industrial).
Enclosed assembly.
EVSE type: ACSEV
- locations with restricted access or non-restricted access
to be supplied with copper conductor only
