hager Unibar H 800 A, Системное руководство

Страница: 86 / 92

Formula characters and abbreviations in accordance with EN
61439-1/-6
86 Technical changes reserved
9 Formula characters and abbreviations in accordance
with EN 61439-1/-6
Important formula characters first mentioned in EN 61439-1/-6*
Abbreviation Description Standard section 61439-1/-6*
(initial mention)
CTI Comparative figure of tracking EN 61439-1, 03/06/2016
ELV Low voltage EN 61439-1, 03/07/2011
EMC Electromagnetic compatibility EN 61439-1, 3.8.13
f
n
Rated frequency EN 61439-1, 03/08/2012
I
c
Short-circuit current EN 61439-1, 3.8.6
I
cc
Conditional short-circuit current EN 61439-1, 3.8.10.4
I
cp
Prospective short-circuit current EN 61439-1, 3.8.7
I
cw
Rated short-time withstand current EN 61439-1, 3.8.9.3
I
n
Rated current EN 61439-1, 3.8.10.1
I
nA
Rated current of a
switchgear combination / BTS EN 61439-1, 5.3.1,
Supplement in
EN 61439-6, 5.3.1
I
nc
Rated current of a circuit EN 61439-1, 5.3.2,
Supplement in EN 61439-6, 5.3.2
I
pk
Rated peak withstand current EN 61439-1, 3.8.10.2
N Neutral conductor EN 61439-1, 3.7.5
PE Protective conductor EN 61439-1, 3.7.4
PEN PE/N conductor, PEN conductor EN 61439-1, 3.7.6
RDF Rated diversity factor
EN 61439-1, 3.8.11 / 5.4
Replacement in EN 61439-6, 5.4
SCPD Short-circuit protective device EN 61439-1, 03/01/2011
SPD Surge protective device EN 61439-1, 03/06/2012
U
e
Rated operational voltage EN 61439-1, 3.8.9.2
U
i
Rated insulation voltage EN 61439-1, 3.8.9.3
U
imp
Rated impulse withstand voltage
rated peak withstand current EN 61439-1, 3.8.9.4 / 5.2.4
Replacement of comments in
EN 61439-6, 5.2.4
U
n
Rated voltage EN 61439-1, 3.8.9.1
k
1A
Temperature factor of the BTS EN 61439-6, 5.3.1
k
1c
Temperature factor of a circuit EN 61439-6, 5.3.2
k
2c
Assembly factor of a circuit EN 61439-6, 5.3.2
R, X, Z Outer conductor and fault circuit
characteristics EN 61439-6, 5.101
*According to the low-voltage directive and the EMC directive, EN 61439-1 does not
provide a presumption of conformity without another part of the standard being applied:
To achieve a presumption of conformity for busbar trunking systems BTS (busways), at
least EN 61439-1 and EN 61439-6 (Part 1 and Part 6 of the standard EN 61439) must be
applied.