Menus & programming
6LE007315Ab
5
Visualization
- Short press on this
button to cycle the
dashboards.
- Short press on this button to go back one level.
- Long press to access the menus.
To access to certain functions, you may be asked for a password.
By default, this is 1000.
Interface
1. Manual operation buttons and indicator.
2. Test button and indicator.
3. Automatic button and LED indicator.
4. Lamp test button.
5. Power, Fault and alarm LED.
6. Navigation buttons.
7. Change dashboard.
8. LCD display.
9. LED COM & Inhibit.
10. Source and switch synoptic.
For advanced configuration go to parameters menu.
SMART WIZARD CONFIG:
When powered for the first time the controller will prompt the user to configure using the wizard.
To access the wizard input code 1000 then the configuration will go as follow:
* The maintenance dashboard allows users to visualise all maintenance alarms configured.
2
STATUS
<2.1>
STAT. / STATE
<2.2>
SYNC / SYNC
1
MIMIC
<1.1>
STAT. / SOURCES
<1.2>
MET. / METERING
<1.3>
INFO. / INFO
5
ALARMS
<5.1>
ACT / ACTIVE
<5.2>
FIN / FINISHED
6
I/O
<6.1>
IN / INPUTS
<6.2>
OUT / OUTPUTS
3
METERING
<3.1>
SYS / SYS
<3.2>
V / V
<3.3>
U / U
<3.4>
F / F
4
TIMERS
<4.1>
RUN / RUNNING
<4.2>
S1 / SOURCE 1
<4.3>
S2 / SOURCE 2
<4.4>
OPT / OPTIONS
<4.5>
TOX / TEST
<4.6>
EOX / EXT TEST
7
MAINTENANCE*
<7.1>
AL1
<7.2>
AL2
<7.x>
ALx
LANGUAGE
DATE AND TIME
SOURCES
INSTALLATION
PRODUCT
NAME
COMMUNICATION
RS485
SCHEDULER
GENERAL PARAMETERS
CUSTOM 1
STATISTICS
CYCLES
OPERATIONS
OPERATING HOURS
SOURCE 1
SOURCE 2
GENSET 1
GENSET 2
BREAKER
CONTROL
MODE / POSITION
TEST
MANUAL RETRANSFER
MAIN MENU
CONTROL
LOG
STATISTICS
GENSET SCHEDULER
PARAMETERS
SPECIFIC FUNCTIONS
MAINTENANCE
ABOUT
LOG
EVENT LOG
ALARM LOG
FAULTS
NETWORK
AUTODETECT.
SETUP
APPLICATION
OP RANGE S1
OP RANGE S2
DISPLAY
SCREEN
DATE AND TIME
OPTIONS
CHANGE PRODUCT NAME
SCREENSAVER TEXT
TIMERS
OPERATION
GENSET SOURCE 1
GENSET SOURCE 2
TESTS ON LOAD
TESTS OFF LOAD
I/O
INPUTS
OUTPUTS
COMMUNICATION
MODBUS ADDRESS
RS485 MODBUS
ALARMS
LOGICAL ALARMS CONFIG
MAINTENANCE ALARMS CONFIG
SYSTEM ALARMS CONFIG
PASSWORD
CHANGE OPERATOR PWD
CHANGE CONFIG PWD
CHANGE MAINTENANCE PWD
BACK
WIZARD
LANGUAGE
DATE AND TIME
SOURCES
INSTALLATION
PRODUCT NAME
COMMUNICATION RS485
PARAMETERS
NETWORK
DISPLAY
TIMERS
I/O
COMMUNICATION
ALARMS
PASSWORD
WIZARD
