hager h3+, Инструкция по эксплуатации системы связи

Страница: 28 / 127

28
6LE005550A
Function of the Energy trip unit
3.1 Energy trip unit navigation and settings
3.1.3
Configuration menu
The Configuration menu is composed of sub-menus used to display and modify the
following trip unit parameters:
- Time and date
- Orientation of the display
- Brightness
- Standby mode.
- Reset maximum measurement values.
- Return to factory settings.
- Data write permission
Setting the time sub-menu
The time of the trip unit can be set using this menu. The time can also be set
using the HTD210H panel display, the h3+ configuration tool, or even via a time
synchronisation order from the Modbus master.
Setting the date sub-menu
The date of the trip unit can be set using this menu. The date can also be set
using the HTD210H panel display, the h3+ configuration tool, or even via a time
synchronisation order from the Modbus master.
Setting the display orientation sub-menu
It is possible to rotate the screen display in 4 directions: Upwards, downwards,
to the left or to the right.
The display is optimised to ensure maximum readability regardless of the
orientation.
Orientation to the right
Adjusting the brightness sub-menu
The brightness can be set to 20%, 40%, 60%, 80% or 100% (60% by default).
Standby mode sub-menu
When Standby mode is activated, the display switches off after 5 minutes if the
joystick is not moved. Standby mode is activated by default and can be activated.
If the joystick is moved within 15 minutes of the display being put on standby, the
last display before standby will be shown. Otherwise, the display will be set to a
view of the Main menu.