hager FB LE Series, Инструкция по установке и эксплуатации

Страница: 41 / 59

Assembly/Installation
12 Technical changes reserved
Fixing the hanging brackets onto the rear of the enclosure
1. 2 Hanging brackets
2. 10 countersunk screws 4.5x20; Tighten with max. 2,5 Nm!
3. 2 countersunk screws 6.0x120; Tighten with max. 2 Nm!
4. insulating layer, mounted as illustrated in the Picture
Choosing the wall plugs
For the fastening are generally building supervision or European technically
approved or European technical rated dowels with steel screws, which are
suitable for the purpose of use, according to the static requirements.
The special provisions of the respective general building supervisory or European
technical approval or European assessment shall be observed.
The choice of suitable wall plugs for masonry must be made depending on the
type of blocks (solid or perforated masonry blocks) and the different materials
such as clay brick, lime-sandstone or normal, lightweight or cellular.
The wall plugs supplied by us are suitable for DIN masonry and blocks.
In case of unknown masonry, plug pull-out tests must be performed!