hager FB LE Series, Инструкция по установке и эксплуатации

Страница: 35 / 59

For your safety
6 Technical changes reserved
-
If the housing has to be laid down, then it must rest on the full surface of its
rear or side part without any jolts occurring.
-
The housing must not lie on the door(s)!!
-
The housing must be locked for this.
-
Please note the heavy weight of the fire protection housing.
-
The transportation work must generally be carried out with at least 2 persons.
-
Tilting on the side or rear panel is only allowed for the purpose of bringing
into the place of installation!
-
In general it is safe to tilt the enclosure on its side or back up to 45°.
-
If tilted by 90°, the door must be secured all round with appropriate spacer
blocks – alternatively, the door panel can be dismantled.
-
In the case of 2-panel door enclosures, in general the doors should be
dismantled if the enclosure has to be placed on its side or back.
-
The outside edges must be protected accordingly.
-
Note the weight -> follow the accident prevention regulations!
-
The enclosure must be secured accordingly.
The key points for transportation and storage at a glance
-
Beware of the risk of tipping during transport!
-
Remove the protective foil, edge protection corners or other packaging
material only directly at the installation site!
-
Please note the installation material enclosed on the protective foil or on the
housing!
-
Never transport the housing when the doors are open!
-
Always transport the housing with at least 2 persons!
-
Long forks corresponding to the dimensions must be used for transport with
a fork lift.
-
Beware of protruding parts.
-
Stay out from under suspended loads when transporting by crane.
-
Report any damage to us immediately.
-
The product must not be stored outdoors and must be protected against
moisture (water).