Häfele HH-VR603T, Инструкция по использованию и установке

Страница: 9 / 27

9
CERAMIC-GLASS COOKTOP
1.Cooking zone Hi-Light front left
2.Cooking zone Hi-Light rear left
3.Cooking zone Hi-Light rear right
4.Cooking zone Hi-Light front right
5.Hob control module
Hob control elements
A
. On/Off sensor
B
. Cooking zone power or remaining heat displays
C
. Sensor (+)
E
. Sensor (-)
F.
Cooking zone selection and On/Off sensors
G.
Cooking zone expansion indicator light
H.
Timer Display
I.
Decimal dot on the power displays:
•
Flashing / steady:
time setting is possible / timer on
•
Fixed:
time setting is not possible
L
.Timer display decimal point:
•
Flashing / steady:
time setting is possible / timer on
•
Fixed:
time setting is not possible
Hob control
• After turning the ceramic glass hob on all displays come on for a moment. The hob is
ready for operation.
• The hob is fitted with electronic sensors which are switched on if you touch the
relevant circle for at least one second.
• Each sensor activation is followed by a sound signal.
• Avoid placing any objects on sensor surface (possible error signalization). Always
keep the sensor surface clean.
Activating the hob
Touch the sensor (A) for at least one second. The hob is now active, and all hotplate
power indicators (B) indicate »0«.
Now you need to select the next setting within 20 seconds, otherwise the hob
switches off again.
Turning coking zone on
After turning the hob on using the sensor (A), within the next 20 seconds start one of
the hotplates.
• Touching the desired hotplate sensor (F), its relevant power indicator indicates »0«.
• By touching sensors (C) or (E) set the desired cooking power from 1-9.
Continuous pressing of (C) or (E) sensors the power level is automatically
increased or reduced.
Another procedure is to change power in steps is by intermediate touching of
relevant sensors.