Häfele HH-VR603T, Инструкция по использованию и установке

Страница: 5 / 27

5
MOUNTING THE BUILT-IN COOKTOP
Caution!
• To avoid any possible hazard, the appliance may be installed by qualified personnel only.
• Panels and furniture lining of the kitchen cabinet receiving the hob must be treated with temperature resistant
adhesives (100°C), otherwise they might be discoloured or deformed because of inadequate temperature resistance.
• The cooking hob is intended for building into the worktop above the kitchen element of 600mm width or more.
• After the installation of built-in hob make sure that there is free access to the two fixing elements in front.
• Suspended kitchen elements above the cooktop must be installed at such distance to provide enough room for
comfortable working process.
• The distance between the worktop and the hood must be at least such as indicated in the instructions for installation of
the kitchen hood, but in no case it may be less than 700mm.
• The use of hard wood decorative borders around the worktop behind the appliance is allowed, in case the minimum
distance remains as indicated on the installation illustrations.
• Minimum distance between the built-in cooktop and rear wall is indicated at the illustration for the installation of the
built-in cooktop.
Built-in hob opening
dimensions
A (mm)
580
B (mm)
510
C (mm)
560
D (mm)
490
E (mm)
40
F (mm)
5
G (mm)
50
• Ceramic-glass hob may be built into the 25 to 40mm thick worktops.
• Bottom kitchen element must not have a drawer. It must be fitted with a horizontal
plate 20mm away from the worktop bottom surface. Space between the plate and the
hob must be empty and no objects may be stored or kept there.
• Rear side of the kitchen element must also have a 50mm high opening along the
entire width of the element, and the front part must have an opening of no less than
5mm.
• Incorporation of the oven under the hob is permissible for ovens equipped with a
cooling fan.
Prior inserting the oven, it is necessary to remove the rear kitchen element panel in the
area of the oven opening.
Equally, the front part of the element must have an opening of no less than 5mm.