10
Setting is always possible for one hotplate only at the time.
Power display indicates »0«, or „H“, depending on the existing temperature of
the hotplate (see Section Remaining Heat Indicator).
You can also turn the hotplate off prior the end of cooking and use the remaining
heat, and save energy.
Automatic fast heating
This function preheats the burner on maximum power in order to bring it rapidly up to
the required temperature. After a given time interval, the power level returns
spontaneously to the established setting.
It may be switched on in any of the hotplates for all power settings except for setting
“9” where power is set at maximum all the time.
Activation of automatic fast heating
• Selected hotplate (F) must be set to level “0”.
• Touch the (E) sensor and the display switches to the power setting 9.
• Press the (C) sensor of the relevant hotplate and the display indicates letter “A”.
• Select desired power level. Power indicator intermittently displays the “A” symbol and
the selected power setting. When the fast heating period expires, hotplate switches to
the pre-selected power setting, displayed constantly on the indicator.
Once the time in the chart below expires, the function is switched off and “A” disappears.
You can also switch the automatic cooking mode off anytime by modifying power level.
Power
setting
1 2 3 4 5 6 7 8 9
Maximum
power cooking
time (min.)
1 3 4,8 6,5 8,5 2,5 3,5
4,5
0,25
Operation time limit
For improved safety, your cooking hob is fitted with a device that limits the duration of
the cooking hob operation for each cooking zone respectively. The duration of
operation is measured from the last change made to the power level settings for a
particular cooking zone. If the power level is not changed for a while, the cooking zone
will automatically be switched off after a certain period of time which depends on the
power level (see table below).
Level
L
1
2
3
4
5
6
7
8
9
Limit Time (h)
2
6
6
5
5
4 1,5 1,5 1,5 1,5
Turning coking zone off
• Selected hotplate must be activated.
• Touching the hotplate sensor (E) set the power level to »0«. After 10 seconds the
hotplate is turned off.
Fast deactivation
• Selected hotplate must be activated.
• Press both (C) and (E) sensors simultaneously, and the hotplate is immediately
switched off.
Turning the hob off
The hob can be switched off any time by pressing the sensor (A).
Child lock
By activating the child lock protection you can stop the operation of the appliance, the
use of hotplates, protecting the children from accidental start and eventual injury.
Activating child lock
• Switch all hotplates off (setting “0”).
• Touch sensor (A) and activate the hob (in case it was idle). All displays indicate »0«.
• Press and held sensor (E).
• Press sensor (F1). All displays indicate letter »L«, which disappears after 20 seconds.
Child lock is now activated.
Turning child lock off
• Protection is switched off by pressing the sensor (A). All displays indicate the letter L.
• Press and held sensor (E).
• Press sensor (F1). Child lock is now off.
Remaining heat indicator
Glass ceramic hob also features remaining heat indicator “H”. As long as the symbol
“H” is on after the hotplate was switched off, the remaining heat may be used for
warming up food or for melting.
Even when the symbol “H” disappears, the hotplate may still be hot.
Be careful of burns!
Содержание HH-VR603T
Страница 14: ......
Страница 15: ...คู มือการใช งาน และ การติดตัง เตาไฟฟ า กระจกเซรามิค HH VR603T HH VR604T ...
