Hafco Woodmaster T-13A, Руководство пользователя

Страница: 10 / 30

9
ELECTRICAL REQUIREMENTS
TO PREVENT
electrical shock
.
All electrical
connections and wiring should be made by qualified
personnel only.
TO REDUCE
the risk of electrical shock,
DO NOT
use
machine outdoors.
DO NOT
expose to rain or mois-
ture. Store indoors in a dry area.
DO NOT
connect the machine to the power source
before you have completed the set up process.
DO NOT
connect the machine to the power source until
instructed to do so.
The motors in these machines are designed to run on
240
volts.
GROUNDING INSTRUCTIONS
This machine
MUST BE GROUNDED
while in use to
protect the operator from electric shock.
In the event of a malfunction or breakdown,
GROUND-
ING
provides the path of least resistance for electric
current and reduces the risk of electric shock. The plug
MUST
be plugged into a matching electrical receptacle
that is properly installed and grounded in accordance
with
ALL
local codes and ordinances.
If a plug is provided with your machine
DO NOT
modify
the plug. If it will not fit your electrical receptacle, have
a qualified electrician install the proper connections to
meet all electrical codes local and state.
IMPROPER ELECTRICAL CONNECTION
of the equip-
ment-grounding conductor can result in risk of electric
shock. The conductor with the green insulation (with or
without yellow stripes) is the equipment-grounding con-
ductor.
DO NOT
connect the equipment-grounding con-
ductor to a live terminal if repair or replacement of the
electric cord or plug is necessary.
Check with a qualified electrician or service personnel if
you do not completely understand the grounding
instructions, or if you are not sure the tool is properly
grounded.
WARNING
!
Fig. A
www.machineryhouse.com.au
www.machineryhouse.co.nz
Page 10 Instructions Manual for T-13A (W813) 1 1/9/19