Hafco Woodmaster T-13A, Руководство пользователя

Страница: 12 / 30

11
Check shipping carton and machine for damage before
unpackaging. Carefully remove packaging materials,
parts and machine from shipping carton. Always check
for and remove protective shipping materials around
motors and moving parts. Lay out all parts on a clean
work surface.
Remove any protective materials and coatings from all
of the parts and the planer. The protective coatings
can be removed by spraying WD-40 on them and wip-
ing it off with a soft cloth. This may need to be redone
several times before all of the protective coatings are
removed completely.
UNPACKING & INVENTORY
After cleaning, apply a good quality paste wax to any
unpainted surfaces. Make sure to buff out the wax
before assembly.
Compare the items to inventory figures; verify that all
items are accounted for before discarding the shipping
box.
If any parts are missing, do not attempt to plug in the
power cord and turn “ON” the machine. The machine
should only be turned “ON” after all the parts have been
obtained and installed correctly.
WARNING
!
A. Handle
B. Dust Port
C. Hex Soc Head Screw
E
F
G
D
C
B
A
www.machineryhouse.com.au
www.machineryhouse.co.nz
Page 12 Instructions Manual for T-13A (W813) 1 1/9/19
D
. Hex Soc head Cap Screw
E. Torx Wrench
F. Hex Wrench
G. Knife Removal Tool Assy