Hafco Metalmaster HM-32B, Инструкция по эксплуатации, Страница: 7 / 23

Fig.3
8.CLAMPING,TABLE BASE,AND MACHINE BASE
(1)When milling left and right, it is advisable to lock the fore and aft table
travel to insure the accuracy of your work. To do this, tighten the leaf screw(4-
13) located on the right side of the table base(Fig.4).
(2)To tighten the left and right travel of the table for fore and aft milling.
Tighten the two small leaf screw(4-13) on the front of the table base(Fig.4).
(3)Adjustable travel stops are provided on the front of the table for control of
cross travel and the desired milling length.
Fig.4