Hafco Metalmaster HM-32B, Инструкция по эксплуатации, Страница: 3 / 23

2.FEATURES:
(1)This machine has several uses,such as surface cutting,drilling,milling,and
also can be equipped with and electric switch for tapping.
(2)This machine is of fine quality,can be operated easily,and it is not limited to
skilled operators.
(3)The drilling and milling operation can be performed by two methods.
1)Handoperation,which makes quick drilling.
2)Wormgear feed operation which makes slow milling.
3)Bronze adjustable muts,whichadiust the thread clearance and reduce the wear
They also make screws rotated smoothly and increase the thread accuracy.
4)Whole column which makes this machine strong,stable,and also keep the
high accuracy.
5)Head of tough cast ensures its accuracy lasting and enduring through the
treatment of precise boring cylinder,grinding,and internal stress relief.
6)To adjust belt and change speed,new pulley cover is easy to open the cover.
3.MOUNTING MACHINE
(1)Be sure to fix the head on the column and put the hanger of the head before
moving machine While moving machine,please keep its balance and safety.
(2)Do not mount machine at the sunshine place to avoid the deformity of
machine and the loss of accuracy.
(3)Check to see if the motor turning in clockwise direction before connecting
the electric distribution line.
(4)Mount machine to a sturdy table or base.It is advisable that the table you
choose be well constructed to avoid any vibration during operation.
(5)Four holes are provided on the machine base for mounting .Before
tightening bolts make sure the work table on the machine is level lengthwise
and crosswise.Use shims if necessary.