Hafco Metalmaster HM-32B, Инструкция по эксплуатации, Страница: 10 / 23

11.ORDERING REPLACEMENT PARTS
Complete parts list is attached. If parts are needed, contact your local
distributor.
12.TAPPING EQUIPMENT REQUIREMENT
This machine can be equipped with an electric switch for tapping operation
clockwise or counterclockwise, and the working depth also can be adjusted by
the limit switch(Electric switch will be installed according to your requirement,
and you must par the cost only).
13.SPECIFICATION OFT-SLOT
This size of T-slot on table as Fig.7.
Fig.7
14.TROUBLE SHOOTING
(1)No running after switch on.
(a)Main switch interruption while volts irregular----Adjust input voltage and
draw back themainswitch .
(b)Break down of fuse in switch box----Replace with new one.
(c)In case of too much current, the overload relay jumps away automationally
----Press the overload relay and it will return to the correct position.
(2)Motor overheat and No power.