Hafco Metalmaster HM-32B, Инструкция по эксплуатации, Страница: 4 / 23

4.CLEANING& LUBRICATING
(1)Your machine has been coated with a heavy grease to protect it in
shipping.This coating should be completely removed before operating the
machine.Commercialdegreaser,kerosene or similar solvent may be used to
remove the grease from the machine,but avoid getting solvent on belts or other
rubber parts.
(2)After cleaning,coat all bright work with a light lubricant,Lubricant all points
in Fig.1 with a medium consistency machine oil.
(3)Lubricating points as shown in arrows.
5.USE OF MAIN MACHINE PARTS(See Fig.1)
(1)To raise and lower the head by head handle.
(2)Equipped with an electric switch for tapping operation clockwise or
counter clockwise.
(3)To adjust the quick of slow feeding by feed handle.
(4)To adjust the table left and right travel by table handle wheel.
(5)To adjust the table fore and aft travel by table handle wheel.
(6)To operate the spindle handle wheel for micro feed.
(7)To adjust the scale size according to working need.
Fig.1