Haes ESENTO XL-RDU, Инструкция по установке, пусконаладке и эксплуатации

Страница: 14 / 24

Esento-RDU Installation, Commissioning & Operating Manual Approved Document Ref: DOC00636 Issue 4.0
12
SETUP & PROGRAMMING
USER MENU
The user menu is used for the general access of information and the setup of the repeater features. This
includes viewing any active disablements on the network, setting the real time clock and configuring the
names in the repeater i.e company name, network panel names & zone identification text as well as editing
the user access code and other options.
To invoke the user menu press and hold the ENTER button for 3 seconds.
After 3 seconds the panel will beep and an ‘Access Code Check’ dialogue
will appear in the display prompting the user access code to be entered.
Enter the 4 digit access code. This is 1-2-3-4 by default but can be changed in the settings.
The user menu will then be displayed. Use the UP & DOWN scroll buttons to navigate through the menu
and the ENTER button to access the programming option. See menu structure over page.
Access Code Check
Enter Access Code: > <
[1-4]-Code [1 Held]-Exit
User Menu
>1.View Active Disablements <
2.Set Time & Date
3.Configure Repeater
RESOUND SILENCE RESET
ENTER
1 2 3 4
Disable
Mode
Test
Mode
Mute
Buzzer
Test
Lamps
RESOUND SILENCE RESET
ENTER
1 2 3 4
Disable
Mode
Test
Mode
Mute
Buzzer
Test
Lamps
Scroll up
Scroll down