3
Safety instructions
Read this instruction manual in its entirety before you start
operating the unit. Especially read through any information
regarding the battery and recharging process to prevent
damage to the accumulators.
The equipment should only be used bytrained operators.
The installation of the working area has to correspond to the
relevant regulations. Set up the unit in such a way, that the
air slits are not blocked and the extracted air can escape
well.
Only switch on the unit, if the handpiece rests secured in the
handpiece holder, or if you hold it safely in your hand.
Prevent any liquids from entering into the control unit, since
this could damage the electronic elements.
Clean the outside of the box only with a damped cloth. Make
sure, that you have unplugged the unit before.
Check the mains cable regularly for damage, and in case of
such, have it be changed or repaired by an authorized
service center.
Prevent your hair from wrapping itself around moving parts.
If applicable, wear a hair net.