(2) Be careful not to exceed time and volume of diagnosis treatment
required.
(3) Always make sure the unit and patient are not under abnormal
conditions.
(4) When any abnormality is found on the unit or the patient, take proper
action such as stopping operating the unit in a manner safe to the
patient.
(5) Do not let the patient touch the unit.
(6) Use the designated components only such as the probe.
(7) Do not use the components for other devices.
(8) Use the unit under the operating environments specified on the
specifications.
(9) Use the Bidop as specified in the Operating manual.
(10) Do not use the unit in a strong electromagnetic field or it may cause
incorrect measurement.
7. After use
(1) Turn the unit off the way specified.
(2) Do not pull the cable(s) too much while disconnecting or it may cause
damage.
(3) Clean the unit, cables and probes and place them in right place for
the next use.
8. Storage
(1) Follow the caution (2) to (6) of section # 4 Device placement in the
previous page.
(2) Clean the unit, probes and place them in right place for the next use.
(3) When using the unit next time, perform the maintenance to make
sure it works properly and safety.
9. Maintenance
(1) Do the periodical maintenance by following the procedures
mentioned in "§ 5-1. Performance Check by user".
(2) The maintenance must be done at least once a year.
10. Probes
(1) Clean the probe using dump cloth before use. Using alcohol or
thinner may damage the probe.
(2) The probe transducer tip is very thin and delicate. Please handle with
great care and use the probe cap when not in use.
