19
4-2. Mode setting details
a. MEMORY - STORE
(1) STORE menu is available when on freeze
mode only. The first memory number
available will be selected automatically on
STORE. If necessary, change the number
where to store waveform data by turning
Shuttle Button up and down.
Note: The memory number with "*" indicates
memory area where other data have been
already stored.
(2) Press Shuttle Button to store the data into
the memory and it will go back to frozen
waveform automatically.
Note: If other data have been already stored in memory number storing, a
confirmation of "OVERWRITE?" will be shown. Press Shuttle Button to
overwrite, or BACK to cancel it for selecting other memory number
available.
b. MEMORY - READ
(1) Select the memory number where you
wish to read waveform data by turning
Shuttle Button up and down.
(2) Press Shuttle Button to show the
waveform. To show next waveform
stored, press Shuttle up and down.
Note: Any frozen waveform is stored temporarily in memory area of FREEZE
separated from regular 30 memories. It can be re-shown by reading from
memory FREEZE and won't be erased until next waveform is frozen or
unit is turned off.
< On normal mode>
< On site guidance mode>
