Hach ORBISPHERE 29122, Руководство пользователя

Страница: 4 / 96

Section 2 General information
In no event will the manufacturer be liable for damages resulting from any improper use of product or
failure to comply with the instructions in the manual. The manufacturer reserves the right to make
changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.
2.1 Safety information
The manufacturer is not responsible for any damages due to misapplication or misuse of this product
including, without limitation, direct, incidental and consequential damages, and disclaims such
damages to the full extent permitted under applicable law. The user is soley responsible to identify
critical application risks and install appropriate mechanisms to protect processes during a possible
equipment malfunction.
Please read this entire manual before unpacking, setting up or operating this equipment. Pay
attention to all danger and caution statements. Failure to do so could result in serious injury to the
operator or damage to the equipment.
Make sure that the protection provided by this equipment is not impaired. Do not use or install this
equipment in any manner other than that specified in this manual.
2.2 Use of hazard information
D A N G E R
Indicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.
W A R N I N G
Indicates a potentially or imminently hazardous situation which, if not avoided, could result in death or serious
injury.
C A U T I O N
Indicates a potentially hazardous situation that may result in minor or moderate injury.
N O T I C E
Indicates a situation which, if not avoided, may cause damage to the instrument. Information that requires special
emphasis.
2.3 Interface box (model 29122)
W A R N I N G
Explosion hazard. Only use the Interface Box 29122 in the safe area and never in the explosive area.
W A R N I N G
The interface box should only be connected to an earthed power supply socket.
W A R N I N G
In accordance with safety standards, it must be possible to disconnect the external power supply of the interface
box in its immediate vicinity.
W A R N I N G
Any maintenance of the interface box should be performed exclusively by personnel specialized and authorized to
work on electrical equipment, in accordance with relevant local regulations.
W A R N I N G
Disconnect the interface box from the power supply before carrying out any maintenance (including changing
fuses).
4 English