23
Section 5
Programming the Instrument
5.1 Programming Overview
Figure 18
9186 Display and Keypad
On initial startup the instrument will display the Main Screen (see
Note:
If a key is not pressed after
10 minutes, the transmitter returns
to the main display.
•
In the Main Screen, use the
LEFT ARROW
key to view one of the
Display 2-4 Menus.
•
Display 2 can be programmed to show sample concentration, sample
temperature, and diffusion current.
•
Display 3 shows the status of programmed alarms.
•
Display 4 shows a bar graph of the current analog outputs.
•
In the Main Screen, use the
RIGHT ARROW
key to view the Menu screen.
•
In the Menu screen, use the
LEFT ARROW
to navigate through the menu
selections (programming, calibration, maintenance, and service) and press
ENTER
to view. Press
ESC
to go back to the previous screen. Press the
LEFT
ARROW
key to scroll through the menu. See
options for each menu selection.
•
Use the
RIGHT ARROW
key to scroll through the list of possible values.
•
To change a numeric value, select the value with the
LEFT ARROW
key. Press
the
RIGHT ARROW
key to highlight and change the leftmost digit. Press
ENTER
to accept the change and move to the next digit to the right.
1.
ESC
Cancels an operation or returns to the next level up.
2.
LEFT ARROW
Validates a selection and passes on to the next step.
3.
RIGHT ARROW
Takes the action as indicated above the key. The action changes depending on the display and menu.
4.
ENTER
Validates the selection indicated above the key. The action changes depending on the display and menu.
