manualshive.com logo in svg

Hach Ultra POLYMETRON 9125, Руководство оператора

Поделиться
Скачать
Hach Ultra POLYMETRON 9125 Скачать руководство пользователя страница 2

Transmitter 9125 – Conductivity / resistivity measurement 

621=191=025 Issue L 

Hach Ultra Analytics 

11/2005

 

This instrument conforms to the European Directives: 

-  89/336/CEE modified by the directive

 

93/68/CEE 

-  73/23/CEE modified by the directive

 

93/68/CEE 

Warning ! 

There are no user-serviceable parts in either the transmitter or sensor. Only Hach 
Ultra Analytics personnel or their authorized representative should attempt repair of 
the system and only components expressly approved by the manufacturer should be 
used. Any attempt to repair the instrument in contradiction of these guidelines may 
result in damage to the instrument and injury to the person making the repair. It will 
also void the warranty and may compromise the safe operation, electrical integrity or 
CE compliance of the instrument. 

Note: 

This equipment has been tested and found to comply with the limits for Class A 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the interference at his 
own expense. 

Precautionary Labels : 

Read all labels and tags attached to the instrument. Personal injury or damage to 
this instrument could occur if not observed. 

This symbol, if noted on the instrument, references the instruction 
manual for operation and / or safety information. 

Electrical equipment marked with this symbol may not be disposed of in 
European public disposal systems after 12 August of 2005. In conformity 
with European local and national regulations (EU Directive 2002/96/EC), 
European electrical equipment users must now return old or end-of life 
equipment to the Producer for disposal at no charge to the user. 

Note : For return for recycling, please contact the equipment producer 
or supplier for instructions on how to return end-of-life equipment for 
proper disposal. 

Important document. Retain with product records. 

! 

All manuals and user guides at all-guides.com

Содержание POLYMETRON 9125





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды