habitat et jardin 103109, Руководство пользователя

Страница: 6 / 16

3UHSDUDWLRQV EHIRUH LQVWDOODWLRQ
Tools required: 1 slotted screwdriver
Product installation location and assembling:
Ь
The product must be installed on a firm and level surface.
Ь
Must provide an adequate access, space and light for easy routine maintenance.
Ь
The motor must be vented and cooled. Do not place the product in damp and poorly ventilated area.
It is recommended that there are at least two persons for the product installation.
Installation notes:
1.Place the product in your chosen place.
Important notes: Particularly in some EC countries, the product is required to place on the ground or
on a permanent upward base! To confirm whether there are related regulations about the ground pool
filter in the area, must consult the local authorities. If specified, the filter should be fixed on the base
platform via three drilled holes. (shown in Fig. 02)
The sand filter can be mounted on concrete base or wooden platform, to prevent its accidental upset.
Note: On the base, the hole diameter should be 8mm.
Note: The maximum diameter of two screws and lock nuts should be 8mm.
2.
The water circulation installation shall comply with the European as well as national/local regulations,
especially when dealing with electrical issues;
Fig. 02
Sand loading:
Note: Use No. 20 silica sand or glass sand, with the particle size of 0.45-0.85 mm.
˄
i.e.
0.018-0.033 inches
˅
, and the overall particle uniformity coefficient of which is smaller than 1.75.