habitat et jardin 103109, Руководство пользователя

Страница: 8 / 16

Control valve unit installation:
Fig. 09 Fig. 10 Fig. 11
Step I
Thoroughly clean the sand and
impurities in the groove, and
place slowly the upper cover
seal (24) into the groove.
Step II
As shown in Figs 10 and 11, align the center hole (A) of the
control valve unit sand shield cover with the outer circle (B) of
the center connecting tube, Cover the gap of the control valve
group (C) on the ontology of convex point (D) after pressed down
in place.
Fig. 12 Fig. 013
Groove
Flathead
screwdriver
or
Phillips
screwdriver